<link href="//maxcdn.bootstrapcdn.com/bootstrap/3.3.0/css/bootstrap.min.css" rel="stylesheet" id="bootstrap-css"> <script src="//maxcdn.bootstrapcdn.com/bootstrap/3.3.0/js/bootstrap.min.js"></script> <script src="//code.jquery.com/jquery-1.11.1.min.js"></script> <!------ Include the above in your HEAD tag ----------> Drilling mud <a href="http://www.solvedrilling.com/Other/">Solid control equipment</a> installation screen mesh point: 1, replacing woven mesh, shall ensure that the drilling fluid <a href="http://www.solvedrilling.com/Shakerscreen/">Shaker screen</a> screen box there is an equal space between the hooks on both sides of the plate and sieve, to tighten the middle pressure flat steel, pull tight plate at the same time maintain a uniform mesh surface tension, slight tapping with a hammer along the full length, check the tension. If the contact is bad, tension is not enough or not divides evenly, is one of the important reasons for the premature screen damage. 2, in the weaving bracket between drilling mud <a href="http://www.solvedrilling.com/Shaleshaker/">shale shaker</a>narmed with special damping elastic strip. In order to make the awning to achieve the longest package life and should make the rubber strip properly position in between, found damaged damping rubber strip should be replaced in a timely manner. After the introduction above, I hope you can have a better understand of <a href="http://www.solvedrilling.com/Desander/">Desander</a> and for the new that has no idea about shale shaker, we suggest you to learn the basic idea from wiki or other article that may illustrate the details better. And as for the question maintain solid control system, we are happily to say that the message above cover most of the notice and you need to read it once more if you still have no idea maintain solid control system.