"Why isn't my disposable vape cartridge working?"
Bootstrap 4.1.1 Snippet by veevaping

<link href="//maxcdn.bootstrapcdn.com/bootstrap/4.1.1/css/bootstrap.min.css" rel="stylesheet" id="bootstrap-css"> <script src="//maxcdn.bootstrapcdn.com/bootstrap/4.1.1/js/bootstrap.min.js"></script> <script src="//cdnjs.cloudflare.com/ajax/libs/jquery/3.2.1/jquery.min.js"></script> <!------ Include the above in your HEAD tag ----------> <p>Why isn't my disposable vape cartridge working?<br> Here are some reasons why this may be the case:</p> <p>Bubbles and liquid leak:</p> <p>The resistance of your <a href="https://www.veevaping.com/collections/disposable-vapes">disposable vape</a> is flooded with liquid. This happens when too much liquid gets into the heating element and floods it.</p> <p>Here the solution depends on whether the atomizer has a top air intake or a bottom air intake.</p> <p>Top Air Intake: The vaporizer bubbles, droplets of liquid pop out, and the liquid rise to the mouth.</p> <p>To solve this problem, we recommend that you remove the mouthpiece (drip tip), place the device on absorbent paper and press the button in the reverse position for 5-6 seconds without sucking. You can shake the device slightly to expel the excess liquid inside the heating element. You have to repeat this process until you get a clean puff without bubbles. You can then clean the air duct well with a piece of paper.</p> <p>Bottom Air Intake: The <a href="https://www.veevaping.com/collections/elf-bar">elf bar disposable vape</a> has liquid leaks at the bottom (leaks at the air intake holes).</p> <p>To fix this, once the resistance is flooded, it's best to open the air intake to the maximum, wrap a tissue around the air intake holes, and blow forcefully through the mouthpiece without pressing the button. In this way, the excess liquid from the heating element flows onto the tissue.</p> <p>The resistor may have worn out; then the solution is to replace it with a new one. Remember that if at some point the heating element has worked without liquid, the cotton inside is most likely burned and the only solution is to replace the heating element with a new one.</p> <p>The liquid does not drain properly in the resistor: You may be using a liquid that is too dense and does not penetrate the resistor properly. Try to use resistors with a larger <a href="https://www.veevaping.com/products/elf-bar-bc5000-disposable-vape">elf bar bc5000</a> liquid inlet. If you open the air intake wider, more liquid can flow.</p> <p><a href="https://www.veevaping.com/products/elf-bar-bc5000-disposable-vape"><img src="https://cdn.shopify.com/s/files/1/0577/6506/8848/products/elfbar_-_bc5000_-_disposables_-_default_500x500.png?v=1665388805" alt="Elf Bar BC5000 Disposable Vape 13ml" width="475" height="429"/></a></p> <p>The atomizer has too little liquid. Using the electronic cigarette with a dry atomizer can seriously damage it. Refill it.</p> <p>Remember to pull deeply so the cotton is well moistened and working properly.</p> <p>The atomizer does not work properly:</p> <p>Usually these problems can be solved by replacing the resistor with a new one.</p> <p>The atomizer resistor has a limited lifespan and it is necessary to replace it regularly.</p> <p>Check the connections of the atomizer to the battery and the resistor.</p> <p>The use of O-rings will reduce effectiveness. Impacts can also damage the resistance and glass, affecting waterproofing. You can replace the pyrex tank on some models or swap out the O-rings.</p> <p><a href="https://www.veevaping.com/">vape store online</a> Liquid leaks out:</p> <p>If it's the air intake vents, use the solution suggested above. If it's the gaskets, check that they're properly sealed, check that the heating element is properly installed and tightened, check the silicone O-rings and replace if necessary.</p> <p><a href="https://www.veevaping.com/collections/e-liquid">https://www.veevaping.com/collections/e-liquid</a></p> <p><a href="https://www.veevaping.com/collections/swft-mod-disposable-vape">https://www.veevaping.com/collections/swft-mod-disposable-vape</a></p>

Related: See More

Questions / Comments: